Introduction To The Maintenance Tasks - Oce VarioPrint 6180 Titan Maintenance Manual

Introduction to the maintenance tasks

Introduction
This manual is intended for trained and certified operators who received the special maintenance
training for the printer. Therefore, this manual is only intended as a reference guide for the
described maintenance procedures.
On the control panel, you must always press [Next] to continue with the next step, or [Finish] to
complete a maintenance task. After you finished a maintenance task, the control panel will also
ask you to restart the system. The procedures in this manual only describe the physical
maintenance actions.
NOTE
In this manual and on the control panel, the trained and certified operator is referred to as the
key operator.
NOTE
Only a key operator is allowed to perform the maintenance tasks that are described in this
manual. You need to have access rights to perform maintenance tasks. A maintenance session
can involve more than 1 maintenance task. A maintenance session ends when you leave the
maintenance screen that displays the maintenance tasks.
CAUTION
The key operator executes the maintenance tasks inside the machine. The key operator must be
aware of the risks of working inside the machine. The key operator must be trained to execute
the described maintenance actions before the key operator can execute these actions.
CAUTION
When you do not follow the procedures as described, there is a risk of electrical shock.
CAUTION
When you do not follow the procedures as described, there is a risk of injury because of moving
parts.
The maintenance levels
The machine is a high-volume production printer. Therefore, a short downtime due to required
maintenance is very important to you. To help you reduce the downtime, 2 levels of maintenance
tasks which key operators can carry out are defined. The following table gives an overview of the
maintenance levels and the respective maintenance tasks.
Overview of the maintenance tasks
Maintenance level
1
Océ VarioPrint 6000 line
Maintenance task
Replace the cleaners
Lock the clean units
Introduction to the maintenance tasks
Where to find more information
Replace the cleaners on page 14
• Lock the clean unit (left) on
page 34
Lock the clean unit (right) on
•
page 36
Chapter 1 - Introduction
4
9