Logging Trap - Edge-Core ECS4120-28F Reference Manual

Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory or sent to
remote syslog servers. You can use the
type of error messages that are stored in memory. You can use the
command to control the type of error messages that are sent to specified syslog
servers.
Example
Console(config)#logging on
Console(config)#
Related Commands
logging history (145)

logging trap (147)

clear log (148)
logging trap
This command enables the logging of system messages to a remote server, or
limits the syslog messages saved to a remote server based on severity. Use this
command without a specified level to enable remote logging. Use the no form to
disable remote logging.
Syntax
logging trap [level level]
no logging trap [level]
Default Setting
Disabled
Level 7
Command Mode
Global Configuration
Command Usage
◆
Using this command with a specified level enables remote logging and sets the
minimum severity level to be saved.
◆
Using this command without a specified level also enables remote logging, but
restores the minimum severity level to the default.
level - One of the syslog severity levels listed in the table on
Messages sent include the selected level through level 0.
– 147 –
Chapter 4
| System Management Commands
logging history command to control the
Event Logging
logging trap
page 145.