Subaru 2009 IMPREZA Service Manual page 1508

Diagnostic Procedure with Diagnostic Trouble Code (DTC)
CY:DTC P2006 INTAKE MANIFOLD RUNNER CONTROL STUCK CLOSED
(BANK 1)
DTC DETECTING CONDITION:
• Immediately at fault recognition
• GENERAL DESCRIPTION <Ref. to GD(H4DOTC)-191, DTC P2006 INTAKE MANIFOLD RUNNER CON-
TROL STUCK CLOSED (BANK 1), Diagnostic Trouble Code (DTC) Detecting Criteria.>
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode <Ref. to EN(H4DOTC)(diag)-54,
OPERATION, Clear Memory Mode.>, and Inspection Mode <Ref. to EN(H4DOTC)(diag)-43, PROCE-
DURE, Inspection Mode.>.
Step
1 CHECK FOR ANY OTHER DTC ON DISPLAY. Is any other DTC displayed?
2 CHECK TUMBLE GENERATOR VALVE RH.
1) Remove the tumble generator valve assem-
bly RH.
2) Check the tumble generator valve body.
CZ:DTC P2007 INTAKE MANIFOLD RUNNER CONTROL STUCK CLOSED
(BANK 2)
DTC DETECTING CONDITION:
• Immediately at fault recognition
• GENERAL DESCRIPTION <Ref. to GD(H4DOTC)-192, DTC P2007 INTAKE MANIFOLD RUNNER CON-
TROL STUCK CLOSED (BANK 2), Diagnostic Trouble Code (DTC) Detecting Criteria.>
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode <Ref. to EN(H4DOTC)(diag)-54,
OPERATION, Clear Memory Mode.>, and Inspection Mode <Ref. to EN(H4DOTC)(diag)-43, PROCE-
DURE, Inspection Mode.>.
Step
1 CHECK FOR ANY OTHER DTC ON DISPLAY. Is any other DTC displayed?
2 CHECK TUMBLE GENERATOR VALVE LH.
1) Remove the tumble generator valve assem-
bly LH.
2) Check the tumble generator valve body.
Check
Is there any dirt or clogging with
foreign objects in the tumble
generator valve?
Check
Is there any dirt or clogging with
foreign objects in the tumble
generator valve?
EN(H4DOTC)(diag)-287
ENGINE (DIAGNOSTICS)
Yes No
Check the appropri- Go to step 2.
ate DTC using the
"List of Diagnostic
Trouble Code
(DTC)". <Ref. to
EN(H4DOTC)(diag)
-83, List of Diagnos-
tic Trouble Code
(DTC).>
Clean the tumble Replace the tum-
generator valve. ble generator valve
assembly RH.
<Ref. to
FU(H4DOTC)-44,
Tumble Generator
Valve Assembly.>
Yes No
Check the appropri- Go to step 2.
ate DTC using the
"List of Diagnostic
Trouble Code
(DTC)". <Ref. to
EN(H4DOTC)(diag)
-83, List of Diagnos-
tic Trouble Code
(DTC).>
Clean the tumble Replace the tum-
generator valve. ble generator valve
assembly LH.
<Ref. to
FU(H4DOTC)-44,
Tumble Generator
Valve Assembly.>