8.4
Telephony Status Information
Selecting Telephony from the Status menu displays information about the state of each PBX port
that connects to the Media Gateway. For each port, the following status information is provided:
State (DMG1000):
•
–
In Service
–
No Link
–
Red Alarm
–
Yellow Alarm
–
Pend D-Chan
–
n/a
•
State (DMG2000):
–
In Service
–
No Link
–
Red Alarm
–
Yellow Alarm
Pend D-Chan
–
–
n/a
Note: If the T1/E1 Signaling Mode parameter is set to ISDN, the Port # refers to the T1 or E1 span
number.
8.5
MIB-II Status Information
Selecting MIB-II from the Status menu provides a number of Web subpages that include MIB-II
information as documented in RFC 1213. The Web subpages include:
•
System:
•
Interfaces:
•
AT:
Note: AT is not supported in Version 5.1 SU2 Software.
IP:
•
•
ICMP:
•
TCP:
UDP:
•
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Provides general Simple Network Management Protocol (SNMP) agent
information including: description, object ID, up time, contact
information, node name, node location, and the type of services offered.
From the System Web subpage, you can download the Media Gateway
MIB file dmg.mib.
Provides Ethernet interface descriptions including: type, speed, physical
address, and statistic counters.
Lists Address Translation tables (physical-to-network address mappings).
Lists counters and address tables for the Internet Protocol (IP) layer.
Provides Internet Control Message Protocol (ICMP) packet and error
counter information.
Provides information about the Transmission Control Protocol (TCP)
counters and connection table.
Provides information about the User Datagram Protocol (UDP) counters
and local listener table.
Unit Status
183