Dialogic DMG1000 User Manual page 206

Diagnostics
4. Select the Test Mode to be Sequential or Simultaneous (this is an optional parameter for
the test).
Note: The Send Message Waiting Status diagnostic tests are always executed in Sequential
To start the specified diagnostic test, press the Start Test button on the Web page.
Note: Executing the PBX/PSTN interface diagnostic tool temporarily disables gateway functionality. Any
active connections will be released.
Figure 48. PBX Self Verification Web Page
9.3.2.1 Configuration Options
The following configuration items are available to be modified by the user:
Interface Extension Numbers
Enter the extension number of the interfaces to include in the selected diagnostic test. Interface
extension numbers are only valid for Initiate Call / Answer Call, and Transfer Call diagnostic
tests. Interface extension numbers that are left blank will not be included in the diagnostic test.
Message Waiting Extension Number
Enter the extension number to send the message waiting status update requests. Message
waiting extension number is only valid for the Send Message Waiting Status diagnostic test
selection.
206
mode due to possible load issues of the PBX under test.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation