Dialogic DMG1000 User Manual page 123

3.10.3.3 Enable T.38 Spoofing (DMG2000 Only)
Description: Enables/disables spoofing in T.38.
Allowed Values:
• On = Enable T.38 spoofing.
Off = Disable T.38 spoofing.
•
Default Value = On
INI File Parameter Name = dspT38SpoofingEnable
3.10.3.4 TSI Removal (DMG2000 Only)
Description: Determines if the Transmitting Subscriber Identification (TSI) is removed.
Allowed Values:
• On - Remove TSI from TDM to reduce packet delay.
• Off - Include TSI in packet sent to packet network.
Default Value = Off
INI File Parameter Name = dspT38TsiRemovalEnable
3.10.3.5 CSI Removal (DMG2000 Only)
Description: Determines if the Called Subscriber Identification (CSI) is removed.
Allowed Values:
On - Remove CSI from TDM to reduce packet delay.
•
• Off - Include CSI in packet sent to packet network.
Default Value = Off
INI File Parameter Name = dspT38CsiRemovalEnable
3.10.3.6 NSF Removal (DMG2000 Only)
Description: Determines if Non-Standard Facilities (NSF) is removed.
Allowed Values:
• On - Remove NSF from TDM to reduce packet delay.
Off - Include NSF in packet sent to packet network.
•
Default Value = Off
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
123