Analog Parameters (Models Dmg1008Ls, Dmg1004Ls Only); Timing Group - Dialogic DMG1000 User Manual

Default Value = None
INI File Parameter Name = sysSerialParityCom2
3.3.4.3 Serial Port Data Bits
Description: Specifies the number of data bits used by the DMG2000 serial port.
Allowed Values:
• 7 data bits
8 data bits
•
Default Value = 8 data bits
INI File Parameter Name = sysSerialDataBitsCom2
3.3.4.4 Serial Port Stop Bits
Description: Specifies the number of stop bits used by the DMG2000 serial port.
Allowed Values:
• 1 stop bit
• 2 stop bits
Default Value = 1 stop bit
INI File Parameter Name = sysSerialStopBitsCom2
3.4 Analog Parameters (Models DMG1008LS,
DMG1004LS Only)
The Analog parameters only apply to the Model DMG1008LS, DMG1004LS product. The Analog
parameters include the following groups:
•

Timing Group

• Feature Codes Group
• Message Waiting Control Group
CPID Group
•
3.4.1 Timing Group
The Analog parameters in the Timing group include:
• Flash Hook
• Loop Current Off Debounce
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
55