Dmg2000 Web Interface - Dialogic DMG1000 User Manual

Figure 6. DMG2000 Web Interface
The Media Gateway's Web interface is divided into two sections, H.323 or SIP Status and
Configure. The Status Web pages provide run-time information and statistics about the operation
of the unit.
Note: H.323 is only supported in Version 5.1 SU1 Software or earlier.
The Configure Web pages provide the system administrator with an interface to configure the
Media Gateway. The Configuration menu selections include:
• IP - Selecting IP brings up the IP Web page which allows you to configure the IP parameters.
For detailed information about the IP parameters, see
• Security - Selecting Security brings up the Security Web page which allows you to configure
Security parameters. For detailed information about the Security parameters, see
"Security
• System - Selecting System brings up the System Web page which allows you to configure
System level parameters. For detailed information about the System parameters, see
Section 3.3, "System
Analog (Models DMG1008LS, DMG1004LS only) - Selecting Analog displays the Analog
•
Web page which allows you to configure the Analog parameters. These parameters only apply
to the analog version of the DMG1000. See
DMG1008LS, DMG1004LS
parameters.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameters", on page 47.
Parameters", on page 51.
Only)", on page 55 for detailed information about the Analog
Section 3.1, "IP
Section 3.4, "Analog Parameters (Models
Overview
Settings", on page 41.
Section 3.2,
31