Ring Cycle Time - Dialogic DMG1000 User Manual

Parameter Reference
Default Value = Short Haul 110 ft
INI File Parameter Name = t1e1TxWave
3.7.2.5 Flash Hook
Description: - Specifies the duration in milliseconds that the Media Gateway will remain on-hook
during a hook flash operation.
Allowed Values: 50 to 4000 milliseconds
Default Value = 500 milliseconds
INI File Parameter Name = telFlashMs
3.7.2.6 Incoming Rings Before Answer
Description: - Specifies the number of ring bursts that must be present at the DMG2000 before the
call is presented to the IP destination as a new call.
Allowed Values: 1 to 100
Default Value = 1
INI File Parameter Name = telIncomRing
3.7.2.7 Ringing Timeout (msec)
Description: - Specifies the number of milliseconds of non-ringing that will signal that an
incoming call has gone away.
Allowed Values: 100 to 10000 milliseconds
Default Value = 6000 milliseconds
INI File Parameter Name = telRingOffMs
3.7.2.8

Ring Cycle Time

Description: Specifies the number of milliseconds of non-ringing that will signal that an incoming
call has gone away[Duplicate of Ringing Timeout parameter. Will be obsoleted.]
Allowed Values: Numerical value from 1000 to 10000
Default Value = 6000
INI File Parameter Name = msRingCycleTime
90
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation