Dialogic DMG1000 User Manual page 84

Parameter Reference
INI File Parameter Name = snmpCommunity
Note: Unit requires a restart if this parameter value is changed.
SNMP System Name
Description: Specifies the SNMP System name.
Allowed Values: Any string with length between 0 - 63 characters.
Default Value = (no default value)
INI File Parameter Name = snmpSysName
Note: Unit requires a restart if this parameter value is changed.
SNMP System Contact
Description: Specifies the SNMP System administration contact name.
Allowed Values: Any string with length between 0 - 63 characters.
Default Value = (no default value)
INI File Parameter Name = snmpSysContact
Note: Unit requires a restart if this parameter value is changed.
SNMP System Location
Description: Specifies the SNMP System location.
Allowed Values: Any string with length between 0 - 63 characters.
Default Value = (no default value)
INI File Parameter Name = snmpSysLocation
Note: Unit requires a restart if this parameter value is changed.
3.6.2.9 Web Server Group
The Web Server subgroup includes the following parameters:
• HTTP Server Enabled
• HTTPs Server Enabled
HTTP Server Enabled
Description: Defines whether the HTTP Server is enabled or disabled. Disable the HTTP Server to
disable non-secure Web access.
84
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation