•
The Media Gateway stores the logs in RAM. Therefore, the logs are not preserved if the unit is
reset or powered down. To save a log you must transfer it to a PC.
Special applications are not required to download logs from the Media Gateway to a PC, but
•
are required to view the logs.
•
All control of logging is through the Web interface.
9.4.2
Debug Trace Capture
The Debug Trace Capture enhances the trace mechanism described in
Mechanism", on page 223. Specifically, it allows users to set the trace mask via the Web page in
addition to allowing the trace output to be redirected to a log file that can then be downloaded. The
DMG2000 Debug Trace Capture control page is shown in Figure 56. While the DMG2000 control
page has more trace keys, the ideas presented in this section apply equally to both the DMG1000
and the DMG2000.
Figure 56. Debug Trace Capture Control Page - DMG2000
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Diagnostics
Section 9.6, "Trace
215