Cpid Type; T1 Isdn Protocol Group (Isdn Signaling Mode) - Dialogic DMG1000 User Manual

INI File Parameter Name = telMwiConfirm
3.7.2.16

CPID Type

Description: Selects the timing of in-band CPID information.
Allowed Values:
• Type I DTMF = CPID sent between first and second ring
• Type II DTMF = CPID sent after off-hook
Default Value = Type I DTMF
INI File Parameter Name = t1e1CpidType
3.7.2.17 Initial Wait for Inband CPID (msecs)
Description: Specifies the number of milliseconds the DMG2000 will wait for the first inband
DTMF digit to arrive after answering an incoming PBX call.
Allowed Values: 100 to 10000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telInbCpidStartMs
3.7.2.18 Inband CPID Complete Timeout (msecs)
Description: Specifies the number of milliseconds the DMG2000 will wait for each subsequent
inband DTMF digit to arrive. If no digit is received within this time, the CPID is assumed to be
complete.
Allowed Values: 100 to 2000 milliseconds
Default Value = 300 milliseconds
INI File Parameter Name = telInbCpidEndMs
3.7.3

T1 ISDN Protocol Group (ISDN Signaling Mode)

The parameters in the T1 ISDN Protocol group include the following:
• ISDN Protocol
• ISDN Protocol Variant
Line Encoding
•
Framing
•
• Selects Transmit Pulse Waveform
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
93