Ver Command; Alarm List Command - Dialogic DMG1000 User Manual

Diagnostics
PIMG>ping 10.0.1.1
10.0.1.1 is alive
PIMG>ping 10.0.1.1 5
PING 10.0.1.1: 56 data bytes
64 bytes from 10.0.1.1: icmp_seq=0. time=2. ms
64 bytes from 10.0.1.1: icmp_seq=1. time=0. ms
64 bytes from 10.0.1.1: icmp_seq=2. time=0. ms
64 bytes from 10.0.1.1: icmp_seq=3. time=0. ms
64 bytes from 10.0.1.1: icmp_seq=4. time=0. ms
----10.0.1.1 PING Statistics----
5 packets transmitted, 5 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/2
PIMG>ping 10.10.10.10
no answer from 10.10.10.10
9.7.4

Ver Command

The Ver command outputs the versions of all hardware and firmware of the unit.
PIMG>ver
Description
======================================================================
DSP
Flash App
Flash DSP
Boot
CPLD
iNIM App
iNIM FPGA
iNIM Boot
Base HW
9.7.5

Alarm List Command

The Alarm List command outputs the current list of generated system alarms. The timestamp of
each alarm is the time since unit start in hours:minutes:seconds.
PIMG>alarms
000:00:000
000:00:000
000:12:000
000:12:000
000:12:000
000:13:000
000:13:000
000:13:000
000:13:000
000:13:000
000:15:000
236
Version
|9.1| |THU AUG 29 15:22:54 2002|
|lab_D| |THU NOV 21 16:20:47 2002|
|9.1| |THU AUG 29 15:22:54 2002|
|dhcp| |WED NOV 20 12:48:16 2002|
0x21
6.6
179
5.0
2
System
System
Telephony
Telephony
Telephony
Telephony
Telephony
Telephony
Telephony
Telephony
Telephony
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
MIB-II Trap: Cold start (0)
MIB-II Trap: Cold start (0)
snw (1) - In Service
snw (1) - In Service
snw (2) - In Service
snw (4) - In Service
snw (5) - In Service
snw (6) - In Service
snw (7) - In Service
snw (8) - In Service
snw (3) - In Service
Dialogic Corporation