3.12.10
Unauthenticated SRTP Enable
Description: This parameter can be used to force Realtime Transport Protocol (RTP) packets to be
received without authentication even if an authentication algorithm has been negotiated between
parties.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values:
•
Yes = RTP VOICE packets will NOT be authenticated.
•
No = RTP VOICE packets will be authenticated per the negotiated algorithm.
Default Value = No
INI File Parameter Name = srtpUnAuthenticatedSRTP
3.12.11
UnEncrypted SRTCP Enable
Description: This parameter can be used to force SRTCP packets to be transmitted in an
unencrypted fashion even if cipher keys have been negotiated between parties.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values:
Yes = Transmitted RTCP CONTROL packets will NOT be encrypted despite the negotiation of
•
cipher keys.
•
No = Transmitted RTCP CONTROL packets will be encrypted per the negotiated cipher keys.
Default Value = No
INI File Parameter Name = srtpUnEncryptedSRTCP
3.12.12
UnEncrypted SRTP Enable
Description: This parameter can be used to force Secure Realtime Transport Protocol (SRTP)
packets to be transmitted in an unencrypted fashion even if cipher keys have been negotiated
between parties.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values:
Yes = Transmitted RTP VOICE packets will NOT be encrypted despite the negotiation of
•
cipher keys.
•
No = Transmitted RTP VOICE will be encrypted per the negotiated cipher keys.
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
133