Dialogic DMG1000 User Manual page 109

3.9.4.4 Mutual Authentication Required
Description: If Yes is selected, the SIP client sends a certificate to the peer server and the SIP
server will send a certificate request to the client. The certificate received from the client is
validated. If the client does not provide a valid certificate, the server will close the session.
If No is selected, the SIP server does not send a client certificate request to the client and the client
does not send a certificate to the server. A certificate received from the client is ignored by the
server.
Allowed Values:
• Yes = SIP client sends certificate to peer server and SIP server sends certificate request to
client.
No = SIP server does not send client a certificate request and client does not send a certificate
•
to the server.
Default Value = Yes
INI File Parameter Name = sipTlsMutualAuthentication
Note: Unit requires a restart if this parameter value is changed.
3.9.4.5 TLS Inactivity Timer
Description: Number of seconds after which an idle Transport Layer Security (TLS) connection
will be closed.
Allowed Values: 10 - 60000 seconds
Default Value = 30 seconds
INI File Parameter Name = sipTlsInactivitySec
3.9.4.6 Verify TLS Peer Certificate Date
Description: Determines whether the TLS peer's certificate date is validated. This requires that the
Media Gateway has already received the network time via SNTP.
Allowed Values:
• Yes = Validate certificate date
• No = Do not validate certificate date
Default Value = Yes
INI File Parameter Name = sipTlsCertVerifyDate
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
109