Transport Type; Call As Domain Name; Invite Expiration - Dialogic DMG1000 User Manual

Parameter Reference
3.9.1.2

Transport Type

Description: Defines the preferred transport protocol of call signaling packets.
Allowed Values:
• TCP = Transmission Control Protocol is used as the transport protocol.
UDP = User Datagram Protocol is used as the transport protocol.
•
Default Value = UDP
INI File Parameter Name = sipTransportType
3.9.1.3

Call as Domain Name?

Description: Defines the host name used in the From header of generated INVITE requests.
Allowed Values:
• Yes = The Media Gateway's domain name is used as the Host Name.
• No = The Media Gateway's IP address is used as the Host Name.
Default Value = No
INI File Parameter Name = sipCallAsDomainName
3.9.1.4 SIPS URI Scheme Enabled
Description: Defines whether the SIPS URI (Uniform Resource Identifier) or SIP URI scheme
will be used for generating SIP messages.
Allowed Values:
• Yes = All Request, To, From, and Contact URIs generated by the gateway will use the SIPS
URI scheme
• No = All Request, To, From, and Contact URIs generated by the gateway will use the SIP URI
scheme.
Default Value = No
INI File Parameter Name = sipSipsUriEnabled
3.9.1.5

Invite Expiration

Description: Specifies the amount of time in seconds that an INVITE request sent by the Media
Gateway is valid and can be accepted by the SIP endpoint. After the defined time in seconds, the
INVITE request expires and is no longer valid.
Allowed Values: 1 - 60000 seconds
104
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation