Parameter Reference
3.10.2.30
TDM to IP AGC Max Gain (DMG2000 Only)
Description: Defines the PCM to IP AGC maximum gain within the range of 0 to 15 dB.
Allowed Values: 0 to 15 dB
Default Value = 12 dB
INI File Parameter Name = dspPbxToIpAgcMaxGain
3.10.2.31
TDM to IP AGC Min Gain (DMG2000 Only)
Description: Defines the PCM to IP AGC minimum gain within the range of 0 to -15 dB.
Allowed Values: 0 to -15 dB
Default Value = -15 dB
INI File Parameter Name = dspPbxToIpAgcMinGain
3.10.3
T.38 Advanced Settings
3.10.3.1
Allow T.38 ECM Faxes (DMG2000 Only)
Description: Enables/disables Error Correction Mode faxes in T.38.
Allowed Values:
•
On = ECM allowed
•
Off = ECM disabled
Default Value = On
INI File Parameter Name = dspT38EcmEnable
3.10.3.2
Transmit Small T4 ECM T.38 Packets (DMG2000 Only)
Description: Enables/disables small T4 ECM packet transmission in T.38.
Allowed Values:
On = Enable small (<256 byte) T4 ECM packet transmission.
•
•
Off = Wait for complete HDLC ECM frame from PCM before processing.
Default Value = On
INI File Parameter Name = dspT38EcmSmallPacketEnable
122
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation