Coder/Decoder Parameters; Fax-Ip Transport Mode - Dialogic DMG1000 User Manual

Table 1. Coder/Decoder Parameters
Codec Type
G.711
G.723
G.729
G.711
G.723
G.729
INI File Parameter Name = dspFrameSizeG711, dspFramesPerPktG723k,
dspFramesPerPktG729
3.6.2.4 Fax Group
The Fax subgroup includes the following parameter:
•

Fax-IP Transport Mode

Fax-IP Transport Mode
Description: Defines the method used by the Media Gateway to transport fax calls over IP.
Allowed Values:
• None = No special processing is performed for transporting fax.
• T.38 = T.38 fax protocol is used.
G.711- Passthrough = Media Gateway will automatically switch the IP media stream to G.711
•
Passthrough.
Default Value = T.38
INI File Parameter Name = gwFaxTransportMode
Note: Unit requires a restart if this parameter value is changed.
3.6.2.5 Quality of Service Group
The Quality of Service subgroup includes the following parameters:
Call Control QOS Byte
•
• RTP QOS Type
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Frame Size in Bytes
DMG1000
Selectable: 10, 20, 30
10
20
DMG2000
Selectable: 10, 20, 30
10
20
Parameter Reference
Frames Per Packet
1
Selectable: 1 through 4
Selectable: 1 through 8
1
1 or 2
Selectable: 1 through 6
77