Gateway Address
Description: IP address of the gateway router that receives all IP packets from the LAN that match
this route. The gateway IP address must be in the same subnet as the route's LAN interface.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = blank
INI File Parameter Name = ipRouteGw
Note: Unit requires a restart if this parameter value is changed.
3.2
Security Parameters
The Security Parameters support Secure Real-time Transport Protocol (SRTP) as well as SIP
Transport Layer Security (TLS) and include the following groups:
•
Certificate Management Group
•
SRTP Management Group
3.2.1
Certificate Management Group
The Security parameters in the Certificate Management Group include:
TLS Certificate Type
•
•
HTTPS Certificate Type
3.2.1.1
TLS Certificate Type
Description: Determines whether the Media Gateway uses a self-assigned or Certificate Authority
signed certificate for SIP Transport Layer Security (TLS).
Allowed Values:
•
Self Signed = Use the self-signed TLS certificate
•
CA Signed = Use the Certificate Authority-signed TLS certificate
Default Value = Self Signed
INI File Parameter Name = secSipTlsUseSelfSignedCert
Note: Unit requires a restart if this parameter value is changed.
3.2.1.2
HTTPS Certificate Type
Description: Determines whether the Media Gateway uses a self-assigned or CA signed certificate
for HTTP over TLS (HTTPS).
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
47