3.4.2
Feature Codes Group
The Analog parameters in the Feature Codes group include:
•
Consult Call Dialtone Drop Code
Consult Call Proceeding Drop Code
•
•
Consult Call Busy Drop Code
•
Consult Call Connected Drop Code
•
Consult Call Disconnected Drop Code
Consult Call Error Drop Code
•
3.4.2.1
Consult Call Dialtone Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Dialtone
state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFaxCDropDt
3.4.2.2
Consult Call Proceeding Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the
Proceeding state (dialed but not connected) and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropProc
3.4.2.3
Consult Call Busy Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Busy
state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
57