Dialogic DMG1000 User Manual page 209

Figure 51. Call Flow for Send Message Waiting Status
9.3.2.3 Test Status
When a diagnostic test is executed the test results are shown in the PBX Self Verification Test
Status table on the Web page.
Test Result Symbol
-
n
P
F
The test can be canceled at any time by pressing the Cancel Test button.
When the test is completed a hyperlink will be displayed to allow the user to return to the PBX Self
Verification Test configuration Web page.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Description
Test skipped because not configured or not available (no capability,
not enabled, or not in-service).
Test was pending but did not execute because a failure occurred.
Test Passed
Test Failed
Diagnostics
209