Gateway Advanced Group - Dialogic DMG1000 User Manual

Parameter Reference
Allowed Values:
• If no H.323 Gatekeeper, SIP Registration Server, or DNS Server is used, then any valid IP
address (in dotted decimal notation) may be specified.
• If an H.323 Gatekeeper, SIP Registration Server, or DNS Server is used, then the IP terminal
address may also be specified as an alias string name, an e-mail address, or an IP address (in
dotted decimal notation).
Note: H.323 is only supported in Version 5.1 SU1 Software or earlier.
Default Value = None
INI File Parameter Name = gwVoIPEndPointId
3.6.2

Gateway Advanced Group

The Gateway Advanced group includes the following subgroups:
• Advanced Call Routing Group
Telephony Group
•
Audio Group
•
• Fax Group
• Quality of Service Group
• E-Mail Group
SysLog Group
•
• SNMP Group
• Web Server Group
• Telnet Server Group
3.6.2.1 Advanced Call Routing Group
Note: The Advanced Call Routing subgroup Gateway parameters only apply to a Media Gateway
operating in the Phone Emulating Mode.
The Advanced Call Routing subgroup includes the following parameters:
• Call Connect Mode
• Send DNIS to VoIP Endpoint
Destination for Un-routable IP Calls
•
• Destination for Un-routable PBX Calls
• Monitor Call Connections
• Call Monitor Interval
68
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation