Tls Group; Tcp Inactivity Timer - Dialogic DMG1000 User Manual

3.9.3.1 UDP/TCP Transport Enabled
Description: Enables or disables the UDP/TCP transports.
Allowed Values:
• Yes = UDP and TCP transports are enabled.
No = UDP and TCP transports are disabled.
•
Default Value = Yes
INI File Parameter Name = sipUdpTcpEnabled
Note: Unit requires a restart if this parameter value is changed.
3.9.3.2 TCP/UDP Server Port
Description: The TCP/UDP Port of the Media Gateway on which SIP messages are sent/received.
Allowed Values: 1024 - 65000
Default Value = 5060
INI File Parameter Name = sipServerPort
Note: Unit requires a restart if this parameter value is changed.
3.9.3.3

TCP Inactivity Timer

Description: Number of seconds after which an idle Transmission Control Protocol (TCP)
connection will be closed.
Allowed Values: 10 - 60000 seconds
Default Value = 30 seconds
INI File Parameter Name = sipTcpInactivitySec
3.9.4

TLS Group

The TLS group includes the following parameters:
TLS Transport Enabled
•
• TLS Server Port
• SSL TLS Protocol
• Mutual Authentication Required
TLS Inactivity Timer
•
• Verify TLS Peer Certificate Date
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
107