Cpid Parsing Configuration; Tone Parameters - Dialogic DMG1000 User Manual

3.10.3.11 Fax Transmit Level (dBm) (DMG2000 Only)
Description: Set the FAX transmit level in T.38 FAX relay mode.
Allowed Values: -15 to 0
Default Value = -10
INI File Parameter Name = dspT38FaxTransmitLevel
3.10.3.12 Maximum UDPTL Packet Size (DMG2000 Only)
Description: Sets the maximum UDPTL packet size in bytes that the T.38 channel will transmit.
Note: This does not include the IP header or UDP header. It only includes the UDPTL header and
UPDTL payload.
Allowed Values: 272 to 512
Default Value = 512
INI File Parameter Name = dspT38UdptlPacketSize
3.10.4

CPID Parsing Configuration

The CPID Parsing Configuration data is included for T1 CAS in the DMG2000 unit and in the
Analog DMG1000 unit. For other models, this data can be accessed instead by typing cpid.htm
following the Media Gateway IP address in the Web browser address box. For example:
http://10.12.13.74/cpid.htm
Modifying this data affects the display parsing of the Media Gateway.
Caution: The CPID Parsing Configuration data should only be modified by advanced users of the Media
Gateway. You are strongly advised to backup your current configuration before proceeding. See
Section 2.6.1, "Exporting Configuration
backing up your configuration.
The text box on this page can be easily modified by either pasting parsing rules into it from a text
file or directly modifying the contents of the control. See
further information on the creation and use of parsing rules.
INI File Parameter Name = ;-CPID RULES
3.11

Tone Parameters

The tone parameters define the characteristics (frequencies, durations, and deviations) of the tones
that the Media Gateway detects during call progress analysis.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Information", on page 39 for additional information about
Chapter 6, "Media Gateway Parsers"
Parameter Reference
for
125