Dialogic DMG1000 User Manual page 201

To start the specified diagnostic test, press the Start Test button on the Web page.
Note: Executing the PBX/PSTN interface diagnostic tool temporarily disables gateway functionality. Any
active connections will be released.
Figure 44. PBX/PSTN Interface Web Page
9.2.2.1 Configuration Options
The following configuration items are available to be modified by the user:
Test Selection
Choose the type of diagnostic test to perform. Available options are Initiate Call and Send
Message Waiting Status.
Interface Selection
Select the specific interface to use in the diagnostic test. If a specific interface is not chosen the
test will select the first interface available.
Channel Selection
Select the specific interface to use in the diagnostic test. If a specific interface is not chosen the
test will select the first interface available. This option is only available on PBX/PSTN
interfaces that have more than one bearer channel.
Destination Number
The required number of the PBX/PSTN endpoint that the diagnostic test will use when
attempting to establish a connection. If this configuration is empty the diagnostic test will not
be performed.
Source Name
The alphanumeric name representing the source party that is delivered to the destination
endpoint during the diagnostic test. This is an optional field that is not required to perform the
diagnostic test.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Diagnostics
201