Web Configuration Notes; Inbound Tdm Call Routing Configuration Web Page - Dialogic DMG1000 User Manual

Dial Plan
Figure 22. Inbound TDM Call Routing Configuration Web Page
Select - Click anywhere in this column to select an entry. A selected row may be moved up or down
in the table, or deleted.
Label - Label for this entry. This label is used only to help identify the rule to the administrator. It
is not used by any other tables in the dial plan configuration.
Enable - Check this box to enable the rule. If this box is not checked, this rule is not checked for
incoming calls.
Channel Pool - The label of an entry in the "Channel Pool" table used to specify the physical
interface on which the incoming call must reside.
Calling Number - The string to match the calling number of the incoming call (the "From" field of
the URL). The format for this string is defined in the section titled "CPID (Number) Matching".
Called Number - The string to match the called number of the incoming call (the "To" field of the
URL). The format for this string is defined in the section titled "CPID (Number) Matching".
Block - If this box is checked for a matched rule, the incoming call is blocked. No outgoing call
will be made. No more rules in the table will be tested.
URI - The string to specify the URI of the outbound call.
CPID Manipulation - The label of an entry in the "CPID Manipulation" table used to create the
calling and called party numbers of the outgoing TDM call.
5.7

Web Configuration Notes

The Web interface is used for configuring all 4 tables of the dial plan. New rules can be added,
existing rules can be modified, and existing rules can be deleted.
• To add a rule, click on the "Add Rule Row" button. A rule with default values will exist at the
bottom of the table. Go in and change these to the desired values.
158
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation