Learning And Validating Call Progress Tones; Learn Tone Web Page - Dialogic DMG1000 User Manual

Working with Call Progress Tones
Use the following buttons on the Manual Tones Web page to manipulate call progress tones:
Apply Changes button
Saves changes to the configuration once the parameters have been edited.
Add button
Adds a row to the tone table, allowing a new tone definition to be added.
Reset to Default Values button
Deletes all existing tones and restores factory default tones.
Export Tones Definitions button
Exports the current tone definitions to an INI file. This INI file can then be imported into other
Media Gateway, which will update only the call progress tones of the gateway. The tones will
also be exported as part of the system configuration information.
For details on the call progress tone parameters, see
4.2

Learning and Validating Call Progress Tones

Learning and validating a call progress tone is discussed in the following topics:
•

Learn Tone Web Page

Learning the Characteristics of Unknown Call Progress Tones
•
• Learn Tone Progress Web Page
• Learn Tone Results Web Page
• Validating Call Progress Tones
• Validate Tone Progress Web Page
Validate Tone Results Web Page
•
4.2.1 Learn Tone Web Page
The Learn Tone Web page shown in Figure 9 allows you to acquire the characteristics for new call
progress tones from the telephony system or to validate the defined call progress tones.
136
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Section 3.11, "Tone Parameters", on page 125.
Dialogic Corporation