Dialogic DMG1000 User Manual page 91

3.7.2.9 Consult Call Dialtone Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Dialtone
state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFaxCDropDt
3.7.2.10 Consult Call Proceeding Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the
Proceeding state (dialed but not connected) and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropProc
3.7.2.11 Consult Call Busy Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Busy
state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropBusy
3.7.2.12 Consult Call Connected Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the
Connected state and to reconnect to the original call.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
91