Dialogic DMG1000 User Manual page 202

Diagnostics
Source Number
The number representing the source party that is delivered to the destination endpoint during
the diagnostic test. This is an optional field that is not required to perform the diagnostic test.
Messages Waiting Status
Choose the status value of the message waiting notification update. This field is only valid
when the Message Waiting diagnostic test is selected.
9.2.2.2 Test Status
When a diagnostic test is executed the test results are shown in the PBX/PSTN Interface Test Status
table on the Web page.
The test can be canceled at any time by pressing the Cancel Test button.
When the test is completed a hyperlink will be displayed to allow the user to return to the
PBX/PSTN Interface Test configuration Web page.
Figure 45. PBX/PSTN Interface Test Status Web Page
When the test is completed the results will show if the diagnostic test was able to establish a
PBX/PSTN connection with the specified Destination Number.
Test Passed: Normal
Test Failed: CallEndReason
The CallEndReason description is the error response received either from the specified destination
PBX/PSTN endpoint or the PBX/PSTN interface of the gateway.
Some of the most common error responses and causes are:
202
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
PBX/PSTN connection was successful
PBX/PSTN connection failed
Dialogic Corporation