Dialogic DMG1000 User Manual page 32

Overview
• Serial Protocol (Phone Emulating mode only) - Selecting Serial Protocol brings up the
Serial Protocol Web page. This Web page allows you to configure the serial protocol for the
Media Gateway serial port. See
detailed information about the Serial Protocol parameters.
• Gateway - Selecting Gateway brings up the Gateway Web page which allows you to configure
Gateway parameters. Some of these parameters differ, depending on whether the unit is being
operated in the Emulating mode or the Driver mode. For detailed information about the
Gateway parameters, see
T1E1 (DMG2000 models only) - Selecting T1E1 allows you to configure the T1 and E1
•
parameters for the T1 or E1 ports on a DMG2000 unit. For detailed information about the T1
and E1 parameters, see
• H.323 - If you have chosen either H.323 Emulating or H.323 Driving as the operating mode,
selecting H.323 brings up the H.323 Web page which allows you to configure H.323
parameters. For detailed information about the H.323 parameters, see
Parameters", on page 99.
Note: H.323 is only supported in Version 5.1 SU1 Software or earlier.
SIP - If you have chosen either SIP Emulating or SIP Driving as the operating mode, selecting
•
SIP brings up the SIP Web page which allows you to configure SIP parameters. For detailed
information about the SIP parameters, see
Parameters", on page 103.
• Tones - Selecting Tones allows you to manipulate call progress tone parameters. These
parameters define the characteristics (frequencies, durations, and deviations) of the tones that
the Media Gateway detects during call progress analysis. For more information, see
Section 3.11, "Tone
Tones".
• Password - Selecting Password brings up the Password Web page. This page allows you to
change your password. For information about the procedure for changing your password, see
Section 2.3, "Changing the
• Upgrade - Selecting Upgrade brings up the Upgrade Web page. The Upgrade Web page
allows you to upgrade the Media Gateway software. For information about the procedure for
upgrading the software, see
• Import/Export - Selecting Import/Export brings up the Import/Export Web page which
allows you to save a copy of your current configuration (Export) to a directory on the computer
or to import a configuration file to the Media Gateway (Import). For information about
exporting a configuration file, see
page 39. For information about importing a configuration file, see
Configuration
• Restart - Selecting Restart from the Configure menu brings up the Restart Web page which
allows you to restart the Media Gateway. Restarting the unit is required when certain
parameter values are changed. You have two options to choose from when restarting the unit:
– Restart Unit Now - Clicking this button will cause the unit to restart immediately.
– Restart Unit When Idle - Clicking this button will cause the unit to restart when the unit is
considered in the idle state. In the idle state, there are no calls (incoming, outgoing, or
connected) on any of the PBX ports of the Media Gateway. By selecting this option, you
will schedule a restart time that minimizes the effect the restart will have on call traffic
through the unit.
32
Section 3.5, "Serial Protocol
Section 3.6, "Gateway
Section 3.7, "T1/E1 Parameters (DMG2000
Parameters", on page 125 and
Password", on page 37.
Section 2.7, "Upgrading the
Section 2.6.1, "Exporting Configuration
Information", on page 39.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Parameters", on page 62 for
Parameters", on page 66.
Section 3.9, "Session Initiation Protocol (SIP)
Chapter 4, "Working with Call Progress
Software", on page 40.
Section 2.6.2, "Importing
Only)", on page 87.
Section 3.8, "H.323
Information", on
Dialogic Corporation