Inform On No Pbx Cpid (Phone Emulating Only); Inform On No Pbx Cpid Time (Phone Emulating Only); Isdn Overlap Receive Minimum Digits - Dialogic DMG1000 User Manual

• No = Media Gateway will not generate this informational message.
Default Value = No
INI File Parameter Name = gwInformUpdatedCallingNumber
3.12.4

Inform On No PBX CPID (Phone Emulating Only)

Description: When this parameter is enabled (Yes), the Media Gateway will generate an
informational VoIP message to the IP peer if no CPID information is available for the call within
the prescribed time-out.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values:
Yes =Media Gateway will generate this informational message.
•
• No = Media Gateway will not generate this informational message.
Default Value = No
INI File Parameter Name = gwInformIfNoPbxCpid
3.12.5

Inform On No PBX CPID Time (Phone Emulating Only)

Description: Specifies the time in milliseconds that the Media Gateway will send the
informational VoIP message indicating that no CPID is available for the call.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values: 1000 to 60000 milliseconds
Default Value = 4000 milliseconds
INI File Parameter Name = gwInformIfNoPbxCpidMs
3.12.6

ISDN Overlap Receive Minimum Digits

Description: Specifies the minimum number of called-party digits that must be received on an
inbound call before the inbound call is processed. If the value is 0, then the call is processed
immediately. Applicable only when the switch is using overlap sending.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values: 0 to 64 digits
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
131