Alarm Information; Call Log Status Information - Dialogic DMG1000 User Manual

Unit Status
8.2

Alarm Information

Selecting Alarm from the Status menu displays the following types of alarm information:
Time- Timestamp of alarm entry.
•
• ID - Identifier of alarm entry.
• Severity - Severity Level of alarm entry.
• Description - Text Description of alarm entry.
• Port - Port Number of alarm entry.
Text Message - Text message of alarm entry.
•
Clicking on the Clear Alarms button will clear all alarm information.
8.3

Call Log Status Information

Selecting Call Log from the Status menu displays information from the Call Log table, including:
• ID - Call Record ID number.
• Start Time - Displays the starting time of the call. This is the time at which the inbound call
rang at the Media Gateway.
End Time - Displays the end time of the call.
•
Source - A call originates either from the PBX network or the IP network. This field specifies
•
whether the call originated from the PBX network (From Switch Network) or from the IP
network (From Packet Network).
• End Reason - Displays the reason for ending the call.
Inbound Info - Displays the call party information of the inbound call. If the call is From
•
Switch Network, this field contains the call party information of the inbound PBX call. In this
case, the format of this field is:
<PBX port number>:<calling party number>,<calling party name> -> <called party
number>, <called party name>
If the call is From VoIP Network, this field contains the call party information of the inbound
IP call. In this case, the format of this field is:
<calling party number>,<calling party name>, <calling party IP> -> <called party
number>, <called party name>, <called party IP>
• Outbound Info - Displays the call party information of the outbound call. If the call is From
Switch Network, this field contains the call information used to dial the outbound call to the
IP network. In this case, the format of this field is:
<alias or IP address dialed>
If the call is From VoIP Network, this field contains the call information used to dial the
outbound call to the PBX network. In this case, the format of this field is:
<PBX port number>:<number dialed>
Clicking on the Clear Log button will clear all call information from the Call Log table.
182
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation