Dialogic DMG1000 User Manual page 42

Parameter Reference
3.1.1.1 Client IP Address
Description: Sets the IP address of the Media Gateway.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = 10.12.13.74
INI File Parameter Name = ipClientAddr
Note: Unit requires a restart if this parameter value is changed.
3.1.1.2 Client Subnet Mask
Description: Sets the subnet mask of the Media Gateway.
Allowed Values: Any valid IP mask.
Default Value = 255.255.255.0
INI File Parameter Name = ipSubnetMask
Note: Unit requires a restart if this parameter value is changed.
3.1.1.3 Default Network Gateway Address
Description: Sets the IP address of the default network gateway router.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = 10.10.11.1
INI File Parameter Name = ipRouterAddr
Note: Unit requires a restart if this parameter value is changed.
3.1.1.4 BOOTP Enabled
Description: When enabled, this parameter causes the Media Gateway to issue a BOOTP request
on startup. A BOOTP/TFTP server may be configured to provide IP credentials, firmware
upgrades, and a configuration INI file.
Note: Either a BOOTP/TFTP server or DHCP server may be used to respond to the Media Gateway
BOOTP request.
Allowed Values:
• Yes = Parameter enabled - Media Gateway issues a BOOTP request on startup.
• No = Parameter disabled - Media Gateway does not issue a BOOTP request on startup.
Default Value = No
42
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation