Wait For Dial Tone After Flash Hook - Dialogic DMG1000 User Manual

Parameter Reference
Default Value = No
INI File Parameter Name = srtpUnEncryptedSRTP
3.12.13

Wait for Dial Tone after Flash Hook

Description: Indicate if the gateway should wait for dial tone after flash hook.
Notes: 1. This parameter is only applicable to T1/E1 CAS.
2. This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values:
Yes = Gateway will wait for dial tone after a Flash Hook as a confirmation that the switch
•
recognized the event.
• No = Gateway does not expect the switch to create dial tone after a Flash Hook.
Default Value = Yes
INI File Parameter Name = telDialToneExpAfterFlashHook
134
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation