Dialogic DMG1000 User Manual page 120

Parameter Reference
Default Value = Soft
INI File Parameter Name = dspJbDeletionMode
3.10.2.22 IP to PCM AGC Enable (DMG2000 Only)
Description: Enables automatic gain control (AGC) in the IP to PCM direction.
Allowed Values:
• On = AGC is enabled.
Off = AGC is disabled.
•
Default Value = On
INI File Parameter Name = dspIpToPbxAgcEnable
3.10.2.23 IP to PCM AGC Slew Rate (DMG2000 Only)
Description: Determines the speed at which the AGC adapts in the IP to PCM direction.
Allowed Values:
• Fast = More emphasis on AGC gain adjustments
• Medium = Mid point
• Slow = More emphasis on Audio Quality
Default Value = Medium
INI File Parameter Name = dspIpToPbxAgcSlewRate
3.10.2.24 IP to PCM AGC Target Level (DMG2000 Only)
Description: Defines the IP to PCM AGC target level for a range of -50 to 0 dBm.
Allowed Values: -50 to 0 dBm
Default Value = -14 dBm
INI File Parameter Name = dspIpToPbxAgcLevel
3.10.2.25 IP to PCM AGC Max Gain (DMG2000 Only)
Description: Defines the IP to PCM AGC maximum gain within the range of 0 to 15 dB.
Allowed Values: 0 to 15 dB
Default Value = 12 dB
120
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation