Dial Inter-Digit Time; Dial Pause Time - Dialogic DMG1000 User Manual

Parameter Reference

Dial Inter-Digit Time

Description: Specifies the delay in milliseconds between dialed DTMF digits to the PBX.
Allowed Values: 30 through 2000 milliseconds
Default Value = 100 milliseconds
INI File Parameter Name = telDialInterDigitMs

Dial Pause Time

Description: Specifies the delay in milliseconds for each pause (,) character encountered in a dial
string.
Allowed Values: 40 through 10000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telDialPauseMs
Turn MWI On FAC (Phone Emulating Only)
Description: Specifies the Features Access Code (FAC) to dial to turn on the Message Waiting
Indicator (MWI) of a PBX extension.
Allowed Values: Any string of less than 11 characters.
Default Value = (no default value)
INI File Parameter Name = telMwiOnFAC
Turn MWI Off FAC (Phone Emulating Only)
Description: Specifies the Features Access Code (FAC) to dial to turn off the Message Waiting
Indicator (MWI) of a PBX extension.
Allowed Values: Any string of less than 11 characters.
Default Value = (no default value)
INI File Parameter Name = telMwiOffFAC
Dial Send Key (Phone Emulating Only)
Description: Specifies the 'hot key' used to indicate the end of a dialed extension. For example, if
the Dial Send Key is configured for an asterisk (*), the DMG1000 will dial extension 3200 as
3200*. For PBXs that have multiple length dial plans, this allows the DMG1000 to specify that the
dialing is complete.
72
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation