Dialogic DMG1000 User Manual page 89

• Ground Start = Ground Start protocol will be used.
• E&M Immediate = E&M Immediate protocol will be used.
E&M Delay = E&M Delay protocol will be used.
•
E&M Wink = E&M Wink protocol will be used.
•
Default Value = Loop Start
INI File Parameter Name = t1e1CASProtocol
3.7.2.2 Line Encoding
Description: Specifies the type of T1 line coding that will be used.
Allowed Values:
• AMI = Alternate Mark Inversion line coding is used.
B8ZS = Binary Eight Zero Substitution line coding is used.
•
Default Value = B8ZS
INI File Parameter Name = t1e1Encoding
3.7.2.3 Framing
Description: Specifies the type of T1 framing that will be used by the line.
Allowed Values:
• SF = D4 Superframe format (12 consecutive T1 frames) is used.
• ESF = Extended Superframe format (24 consecutive T1 frames) is used.
Default Value = ESF
INI File Parameter Name = t1e1Framing
3.7.2.4 Selects Transmit Pulse Waveform
Description: Selects the method to be used for generating the Transmit Waveform Shape.
Allowed Values:
Short Haul 110 ft = The DMG2000 is 0 - 110 feet from T1 line source.
•
• Short Haul 220 ft = The DMG2000 is 110 - 220 feet from T1 line source.
• Short Haul 330 ft = The DMG2000 is 220 - 330 feet from T1 line source.
• Short Haul 440 ft = The DMG2000 is 330 - 440 feet from T1 line source.
Short Haul 550 ft = The DMG2000 is 440 - 550 feet from T1 line source.
•
• Short Haul 660 ft = The DMG2000 is 550 - 660 feet from T1 line source.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
89