Tone Event - Dialogic DMG1000 User Manual

Parameter Reference
These call progress tones can be viewed and edited manually from the Web interface if the
characteristics are known, or the Media Gateway can be directed to analyze and learn the
characteristics of specific call progress tones. For more information on viewing, editing, learning,
and validating call progress tones from the Web interface, see
Progress Tones".
The call progress tone parameters include the following:
• ID
•

Tone Event

• Tone Name
Cadence Type
•
Number of Cadence Cycles
•
• Tone Frequency
• Tone Frequency Deviation
• Tone Cadence Time
Tone Cadence Time Deviation
•
In addition, you can edit the INI file directly if needed as discussed in the following topic:
• Editing the INI File Directly
3.11.1 ID
Description: Automatically assigned IDs for reference. These IDs cannot be edited.
3.11.2 Tone Event
Description: Specifies the tone event for this tone definition.
Allowed Values:
• None
• Dialtone
• Ringback
Busy
•
• Congestion
• Disconnect
• Error
SIT
•
Pager
•
• Modem
• Fax
• FaxCNG
126
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Chapter 4, "Working with Call
Dialogic Corporation