Trace Commands; Supported Trace Types; Trace Show - Dialogic DMG1000 User Manual

Diagnostics
Prot
Code
Error
Warn
Init
Alarm
Event
Stat
(1) System starts with these enabled on all trace keys.
9.6.3

Trace Commands

The trace commands include the following:
•

trace show

• trace default
trace <trace key> <trace type|all> <on|off>
•
• trace all <trace type|all> <on|off>
• trace <trace key|all> reset
• trace all off
trace port <1-based port number|all> <on|off>
•
trace time <on|off>
•
• trace -l
9.6.3.1 trace show
The trace show command displays the trace levels of all trace modules and port-related trace
settings. The following is an example of a trace show display:
PIMG>trace show
Key
----------
System
Cfg
Tel
DspIf
DspRoot
EthMgr
Arp
Web
Alarm
228
Table 12. Supported Trace Types
Trace Types
Protocol
Software/Code
Errors (1)
Warnings
Software/Device initialization (1)
Alarms (1)
Hookswitch, Lamps, Tones, Displays, Button Presses
Statistics
Traces
------------------------
Error Init Debug
Error Init Debug
Error Init Debug
Error Init Debug
Error Init Debug
Error Init Debug
Error Init Debug
Error Init Debug
Error Init Debug
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Trace Description
Dialogic Corporation