3.9.5.3
Backup Proxy Server Address
Description: The IP Address of the SIP Backup Proxy Server through which the Media Gateway
may send/receive requests. If blank, the Media Gateway will not use a Backup Proxy Server.
Allowed Values: Any valid IP Address in dotted decimal notation.
Default Value = (no default value)
INI File Parameter Name = sipProxyServerAddr2
3.9.5.4
Backup Proxy Server Port
Description: The IP Port of the SIP Backup Proxy Server. If an IP Address was entered for the
Backup Proxy Server Address parameter, then the Backup Proxy Server Port parameter must be set
to a valid port number.
Allowed Values: 1024-65000
Default Value = 5060
INI File Parameter Name = sipProxyServerPort2
3.9.5.5
Proxy Query Interval (sec)
Description: Interval in seconds at which the Primary Proxy Server is queried. If the Primary
Proxy Server does not respond to the query, the Media Gateway will switch to the Backup Proxy
Server. Once the Primary Proxy Server responds to the query, the Media Gateway will switch back
to the Primary Proxy Server.
Note: This parameter is only valid if the Backup Proxy Server Address parameter is configured. The
Primary Proxy Server must respond to SIP OPTIONS requests in order for the Proxy Query to
succeed.
Allowed Values: 10-3600 seconds
Default Value = 30 seconds
INI File Parameter Name = sipProxyQueryIntervalSec
3.9.6
Timing Group
The Timing group includes the following parameters:
•
T1 Time
•
T2 Time
T4 Time
•
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
111