Pbx Self Verification Test Overview - Dialogic DMG1000 User Manual

Diagnostics
9.3.1

PBX Self Verification Test Overview

The PBX self verification diagnostic tool is a Web page user application that can be used to provide
verification of PBX compatibility and also to confirm the Media Gateway configuration values
relating to the PBX interface are valid.
Figure 47. PBX Self Verification Diagnostic Test
9.3.1.1 Features
Currently the PBX self verification diagnostic provides the ability to verify the following
operations:
Initiate Call
Originate an outbound PBX call
•
• Receive outbound call progress (alerting)
• Send and Receive DTMF digits
• Receive far-end disconnect supervision
Answer Call
• Answer an incoming PBX call
Receive call party identification (CPID)
•
• Send and Receive DTMF digits
• Release an active call
Transfer Call
Transfer a connected PBX call
•
• Answer an incoming (transferred) PBX call
Receive call party identification (CPID) during incoming transfer
•
• Receive DTMF digits after transfer completed
Message Waiting
• Send message waiting notification request (Set)
• Send no message waiting notification request (Clear)
204
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation