Channel Selection Mode; Web Configuration Interface; Channel Pool Configuration Web Page; Tdm Interface Types - Dialogic DMG1000 User Manual

Table 3. TDM Interface Types
Gateway Type
Analog
Digital (PBX)
T1 - CAS
T1 - ISDN
E1
5.3.3

Channel Selection Mode

It is often desirable to select a method for choosing which channel within a channel pool is used to
place an outgoing TDM call. The channel pool configuration uses a channel selection mode
configuration option for this. The valid options are:
• Ascending Linear - The first (lowest logical) available channel is chosen to place the call.
• Ascending Cyclical - Channels are chosen upward sequentially from call to call. The selection
wraps back to the first channel when the limit is reached.
• Descending Linear - The last (highest logical) channel is chosen to place the call.
• Descending Cyclical - Channels are chosen downward sequentially from call to call. The
selection wraps back to the last channel when the limit is reached.
Note: Channel Selection Mode applies to outgoing calls only.
5.3.4

Web Configuration Interface

Figure 19 is a sample screen shot of the channel pool configuration Web page:
Figure 19. Channel Pool Configuration Web Page
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Maximum number of
supported Interfaces
8
8
4
4
4
Number of supported
Channels per interface
1
1
24
23
30
Dial Plan
153