Snmp Traps Enabled; Snmp Trap Ip List - Dialogic DMG1000 User Manual

SNMP Traps Enabled?

Description: Defines whether an SNMP trap is generated to signal an alarm.
Allowed Values:
• Yes = SNMP trap is generated.
No = SNMP trap is not generated.
•
Default Value = No
INI File Parameter Name = snmpTrapEnabled
SNMP Minimum Alarm Severity
Description: Defines the minimum alarm severity level to generate an SNMP trap.
Allowed Values:
• Error
• Warning
• Info
Default Value = Info
INI File Parameter Name = snmpAlarmSeverity

SNMP Trap IP List

Description: Semi-colon delimited list of the IP addresses of SNMP Managers who are to receive
SNMP traps generated by the IP gateway.
Allowed Values: Semi-colon delimited list of IP addresses.
Default Value = 255.255.255.255
INI File Parameter Name = snmpTrapAddressList
SNMP Community Name
Description: Specifies the SNMP Community name. The specified community has read-only
capabilities.
Allowed Values: Any string with length between 5 - 14 characters.
Default Value = public
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
83