Dialogic DMG1000 User Manual page 58

Parameter Reference
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropBusy
3.4.2.4 Consult Call Connected Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the
Connected state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropCon
3.4.2.5 Consult Call Disconnected Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the
Disconnected state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropDis
3.4.2.6 Consult Call Error Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Error
state and to reconnect to the original call.
Allowed Values: Dialable number, including '!' for flash hook and 'p' for pause.
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropError
58
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation