Revision History - Dialogic DMG1000 User Manual

Revision History

This revision history summarizes the changes made in each published version of this document.
Document No. Publication Date
64-0260-02 September 2007
64-0260-01 April 2007
C73213-002 November 2006
Rev 01
C73213-001 April 2006
Rev 01
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide – September 2007
Dialogic Corporation
Description of Revisions
Updated to support Version 5.1 SU2 Software.
Added new DMG1004LS model.
Added note to say H.323 is only supported in Version 5.1 SU1 Software or earlier.
Chapter 3, "Parameter Reference"
Parameters section for MCI Message
Chapter 3, "Parameter Reference"
Group section for RTP Source IP Address
Validation, SNMP Community
SNMP System Location, and
Chapter 3, "Parameter Reference"
Protocol (SIP) Parameters section for
Chapter 5, "Dial Plan" added ability to manipulate Redirecting Party in the
(Number) Manipulation section.
Updated to support Version 5.1 SU1 Software.
Global Updates: Changed product names and links from Intel to Dialogic.
The document number and title have been updated with new naming conventions.
The products previously known as Intel NetStructure PBX-IP Media Gateway (PIMG)
and T1/E1-IP Media Gateway (TIMG) are now Dialogic
®
(DMG1000) and Dialogic 2000 Media Gateway (DMG2000). For more product name
changes, refer to New Product Naming
Updated notes to say LAN2 is only supported in Version 5.1 SU1 Software or later.
Chapter 3, "Parameter Reference"
Subnet Mask, IP Management
Destination Mask, Gateway Address,
Only), and Call Progress Filter Two Tones Max Twist in dB (DMG2000
Chapter 5, "Dial Plan" added new chapter.
Chapter 8, "Unit Status" added
Section 8.5.2, "Supported MIBs", on page 185, and
on page 187.
Chapter 9, "Diagnostics" added
Section 9.2, "PBX/PSTN Interface
Verification Test", on page 203.
Updated to support Version 5.1 Software.
Chapter 1, "Overview" added information about the DMG2120DTI model and added
" "
Security section.
Chapter 3, "Parameter Reference"
" "
Security Parameters section.
Chapter 7, "Data Security" added new chapter.
Removed the PBX configuration chapters from the User's Guide.
Initial version of document to support Version 5.0 Software.
added new parameter in
Type.
added new parameters in
Validation, RTP Source UDP Port
Name, SNMP System Name,
Telnet Server Enabled.
added new parameter in
DNS Translation of Phone
®
1000 Media Gateway
Conventions.
added new parameters
Interface, Ethernet Interface,
Call Progress Filter SNR in dB (DMG2000
Section 8.5.1, "SNMP Agent", on page 184,
Section 8.5.3, "SNMP
Section 9.1, "VoIP Interface
Test", on page 199, and
added various new parameters and added
Serial Protocol
Gateway Advanced
SNMP System Contact,
Session Initiation
Numbers.
CPID
Client IP Address, Client
Destination Address,
Only).
Alarms",
Test", on page 195,
Section 9.3, "PBX Self
15