Call Connect Mode; Send Dnis To Voip Endpoint; Destination For Un-Routable Ip Calls - Dialogic DMG1000 User Manual

Call Connect Mode

Description: Specifies when voice path is created between the IP device endpoint and the PBX on
IP-to-PBX calls.
Allowed Values:
• On-Answer = the voice path is not established until the dialed PBX extension answers the call.
Instant = the voice path is established as soon as the PBX extension is dialed.
•
Default Value = Instant
INI File Parameter Name = gwCallConnectMode

Send DNIS to VoIP Endpoint

Description: Specifies whether Dialed Number Identification Service (DNIS) received on inbound
TDM call is passed to the VoIP endpoint.
Allowed Values:
• Yes = DNIS is passed to the VoIP endpoint.
No = DNIS is not passed to the VoIP endpoint.
•
Default Value = No
INI File Parameter Name = gwSendDnisToVoip

Destination for Un-routable IP Calls

Description: Specifies the IP terminal address to which un-routable IP-To-PBX calls will be
forwarded.
Allowed Values:
• If no H.323 Gatekeeper or SIP Registration Server is used, then any valid IP address may be
specified.
If there is an H.323 Gatekeeper or SIP Registration Server, then the IP terminal address may be
•
specified as an alias string name, an e-mail address, or an IP address.
• If blank (none), then un-routable IP-To-PBX calls are rejected.
Note: H.323 is only supported in Version 5.1 SU1 Software or earlier.
Default Value = (no default value)
INI File Parameter Name = gwDefaultIPDest
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
69