Voip Interface Test Operation - Dialogic DMG1000 User Manual

Diagnostics
9.1.1.1 Features
Currently the VoIP interface diagnostic provides the ability to:
• Originate a VoIP call to a specified endpoint address and verify endpoint response.
• Send a message waiting notification status update request and verify endpoint response.
9.1.1.2 Location
The VoIP interface diagnostic tool is only part of the suite of diagnostic utilities that can be used to
assist in recording, testing, and resolving configuration or compatibility issues.
The Media Gateway diagnostic utilities are accessible via the Web interface by selecting the
Diagnostics link on the left side menu of any Web page.
9.1.2

VoIP Interface Test Operation

To operate the VoIP interface diagnostic tool the user must first navigate to the VoIP Interface tab
via the Media Gateway's user interface.
In the VoIP Interface Test Configuration table:
1. Choose the diagnostic test to perform by selecting one of the options in the Test Selection
field.
2. Then the user must fill in the Destination VoIP Address field of the VoIP endpoint that
the diagnostic test will use when attempting to establish a connection.
3. Fill in any optional source party information (Source Name and Source Number) that
will be delivered to the destination endpoint during the diagnostic test.
4. If the message waiting diagnostic test is selected, choose the Messages Waiting Status to
be used in the message waiting notification request.
To start the specified diagnostic test, press the Start Test button on the Web page.
Note: Executing the VoIP interface diagnostic tool temporarily disables gateway functionality. Any active
connections will be released.
196
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation