Dial Digit On Time - Dialogic DMG1000 User Manual

• Maximum Call Party Delay (Phone Emulating Only)
•

Dial Digit On Time

Dial Inter-Digit Time
•
Dial Pause Time
•
• Turn MWI On FAC (Phone Emulating Only)
• Turn MWI Off FAC (Phone Emulating Only)
• Dial Send Key (Phone Emulating Only)
Outbound Call Connect Timeout (Phone Emulating Only)
•
• Wait for Ringback/Connect on Blind Transfer (Phone Emulating Only)
• Hunt Group Extension (Phone Emulating Only)
Minimum Call Party Delay (Phone Emulating Only)
Description: Specifies the minimum number of milliseconds that the Media Gateway will wait for
display information (calling party information) on an inbound PBX call before the call is routed to
the IP destination. (0 for no delay)
Allowed Values: 0 through 10000 (msec)
Default Value = 0
INI File Parameter Name = telMinWaitForCpid
Maximum Call Party Delay (Phone Emulating Only)
Description: Specifies the maximum number of milliseconds that the Media Gateway will wait for
display information (calling party information) on an inbound PBX call before the call is routed to
the IP destination. (0 for no delay)
Allowed Values: 0 through 10000 (msec)
Default Value = 2000
INI File Parameter Name = telCallInfoTout
Dial Digit On Time
Description: Specifies the duration in milliseconds of a dialed DTMF digit to the PBX.
Allowed Values: 30 through 2000 milliseconds
Default Value = 100 milliseconds
INI File Parameter Name = telDialDigitOnMs
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Parameter Reference
71