Validate Tone Results Web Page (Bottom) - Dialogic DMG1000 User Manual

Figure 15. Validate Tone Results Web Page (Bottom)
The validated tones are grouped into the following tone results:
• Validation Errors
• Validated Tones
After viewing the validation results, you can return to the Manual Tones Web Page (see Figure 8)
by clicking on the Return to Tone Configuration link.
Validation Errors
An error occurred when trying to validate the tones listed in this section. These tones cannot be
added to the configuration due to the error encountered. Possible reasons for error include:
Failed Validation unexpected CP tone
When the Gateway dialed the destination address to validate the tone, an unexpected call
progress (CP) tone was detected. The detected CP tone is listed in the error message.
Failed Validation Timeout
When the Gateway dialed the destination address to validate the tone, no CP tone was
detected.
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation
Working with Call Progress Tones
147