Pbx/Pstn Interface Test Operation - Dialogic DMG1000 User Manual

Diagnostics
Figure 43. PBX/PSTN Interface Diagnostic Test
9.2.1.1 Features
Currently the PBX/PSTN interface diagnostic provides the ability to:
Originate a PBX/PSTN call to a specified endpoint address and verify endpoint response.
•
• Send a message waiting notification status update request and verify endpoint response.
9.2.1.2 Location
The PBX/PSTN interface diagnostic tool is only part of the suite of diagnostic utilities that can be
used to assist in recording, testing, and resolving configuration or compatibility issues.
The Media Gateway diagnostic utilities are accessible via the Web interface by selecting the
Diagnostics link on the left side menu of any Web page.
9.2.2

PBX/PSTN Interface Test Operation

To operate the PBX/PSTN interface diagnostic tool the user must first navigate to the PBX/PSTN
Interface tab via the Media Gateway's user interface.
In the PBX/PSTN Interface Test Configuration table:
1. Choose the diagnostic test to perform by selecting one of the options in the Test Selection
field.
2. The user must fill in the Destination Number field of the PBX/PSTN endpoint that the
diagnostic test will use when attempting to establish a connection.
3. Optionally, select the interface and channel index of the gateway to use in the diagnostic
test by choosing the Interface Selection or Channel Selection. If Automatic is chosen the
test will select the first interface and channel available.
4. Fill in any optional source party information (Source Name and Source Number) that
will be delivered to the destination endpoint during the diagnostic test.
5. If the message waiting diagnostic test is selected, choose the Messages Waiting Status to
be used in the message waiting notification request.
200
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation